facebook
twitter
linkedin

 
Home › Cures and Sealers › Acrylics › Certi-Vex® Guard Clear AIM

Certi-Vex® Guard Clear AIM


25% Solids, Low-VOC, Solvent-Based, High Gloss, Non-Yellowing, One Step Acrylic Cure & Protect with Penetrating Silane for Concrete

 

Certi-Vex Guard Clear AIM is an innovative, low-VOC, solvent-based, high gloss, one step acrylic cure and protect with a penetrating silane for use on both new and existing broom finish and decorative concrete. The non-yellowing, film forming acrylic cures new concrete to ASTM 309 specifications, while penetrating silane reacts within pores and capillaries to form a hydrophobic gel, protecting the concrete from the damaging effects of freeze/thaw cycles, deicing chemicals and chloride penetration.

This innovative one-step product eliminates the costly removal of curing compounds and time-consuming water curing of new concrete when a protective penetrating silane is desired. Once applied, the surface is properly cured and protected in one application, putting concrete into service weeks sooner than conventional methods.

Uses

  • Recommended for use on both broom finish and decorative exterior concrete
  • New and existing horizontal and vertical concrete
  • All types of concrete flatwork, driveways, plazas, patios, walkways and loading docks
  • Long-term protection of both new and existing exterior concrete from damage caused by freeze/thaw cycles and deicing chemicals
  • For commercial and residential applications

Advantages

  • Eliminates the 28 day, 3-step process to provide silane protection to newly placed concrete.
  • Long term protection of both new and existing exterior concrete from damage caused by freeze/thaw cycles and deicing chemicals.
  • Allows freshly placed concrete to achieve its maximum design strength and durability.
  • Non-yellowing and may be used on decorative and stamped concrete finishes.
  • Reduces labor costs putting concrete into service weeks sooner than conventional methods.
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091

ERISA Documents for Welfare Benefit Plan