facebook
twitter
linkedin
 
Home › Cures and Sealers › Acrylics › Certi-Vex® AC1315 Satin
 

Certi-Vex® AC1315 Satin

25% Solids, Non-Yellowing, Low Sheen/Satin Finish, Solvent-Based, Acrylic Curing & Sealing Compound for Concrete
 

CERTI-VEX AC1315 Satin is a styrene acrylic, solvent-based, non-yellowing curing, sealing, hardening, dust proofing and water repellent compound that is tough, chemical resistant, and long lasting. The product is design to protect and enhance exterior new and existing concrete, stamped, decorative and exposed aggregate concrete and architectural horizontal and vertical sections where a clear, low sheen/satin finish is required. Certi-Vex AC 1315 Satin also provides protection from the damaging effects of water penetration and staining. Certi-Vex AC1315 Satin features breathable technology which allows moisture vapor to pass through rather than becoming trapped, reducing whitening, peeling and flaking.

Uses

  • To cure fresh exterior concrete where superior curing efficiency and non-yellowing performance are required
  • Seal, harden, and dustproof existing concrete, particularly architectural or residential concrete exposed to freeze thaw or UV light
  • Enhance color and provide uniform appearance of dry shake hardened floors and stamped concrete

Advantages

  • Allows freshly placed concrete to achieve maximum design strength and durability
  • Coated surfaces are easier to clean and maintain
  • Excellent protection against staining or damage caused by exposure to alkalis, salts, cleaners and common industrial chemicals
  • Reduces efflorescence, dusting and spalling
  • Recoatable
© 2022 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2022 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091