facebook
twitter
linkedin
 
Home › Cementitious Products › Grouts › Conset™ Grout

Conset™ Grout

Non-shrink Non-metallic Grout

Conset Grout is a prepackaged, cementitious, non-shrink, non-metallic grout. It is a high strength grout that may be placed at plastic, flowable and fluid consistencies allowing versatile placement under varying conditions. Conset Grout is approved for use by numerous DOT's.

 

Uses

  • Building Columns
  • Hand Rails
  • Bridge Beams
  • Boiler Plates
  • Sewers
  • Machine Bases
  • Sole Plates
  • Precast Beams
  • Precast Columns
  • Dowels
  • Fence Posts
  • Highway Barriers
  • Anchor Bolts
  • Base-plates
  • Bed Plates
  • Underpinnings
  • Wall Panels
  • Pipes/ Sleeves

Advantages

  • Flowable and self-leveling
  • May be placed at plastic consistency for increased strength requirements
  • Non-shrink for maximum load bearing
  • Can be extended for placements over 2 inches ( 5 cm) deep
  • Natural aggregate matches the color of concrete
  • Pumpable for rapid placement on large projects
  • Contains no oxidizing components, will not rust
© 2018 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2018 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091