Home › Cementitious Products › Grouts › Conset™ Grout-NY

Conset™ Grout-NY

Non-shrink Non-metallic Grout

Conset™ Grout NY is a prepackaged, cementitious, non-shrink grout formulated to the specific needs of the NY State Department of Transportation. It is a high strength grout that may be placed at plastic, flowable and fluid consistencies allowing versatile placement under varying conditions.

Conset™ Grout-NY is approved for use by the State of New York Department of Transportation as a repair material, grouting material and shear key grout under List Number 7.42-3.1-1, Sections 701.04, 701.05 and 701.06.

Uses

Bridge Columns
Hand Rails
Bridge Beams
Shear Keys
Sewers
Underpinnings
Wall Panels
Pipes and Sleeves
Dowels
Fence Posts
Highway Barriers
Anchor Bolts
Baseplates
Precast Beams
Precast Columns

Advantages

Flowable and self-leveling, may be placed at plastic consistency for increased strength requirements
Non-shrink for maximum load bearing
Free of chloride ions or other additives known to cause
oxidation and deterioration of base concrete and reinforcing steel
Consistent performance in damp or wet environments, may be placed above or below grade
Can be extended for placements over 2”/5 cm deep
Natural aggregate matches the color of standard concrete
Pumpable for rapid placement on large projects
High density, low water to cement ratio

Technical Data Sheet

Safety Data Sheet

LEED Environmental Stewardship Letter