facebook
twitter
linkedin
 
Home › Coatings and Paints › Commercial Building Exteriors › Graffiti Seal

Graffiti Seal

Graffiti Seal is a single component, water based, sacrificial coating system for easy and environmentally safe removal of graffiti.

 

Uses

  • Interior or exterior vertical surfaces
  • Poured-in-place and precast concrete, masonry, brick, block and other porous substrates
  • Aluminum, steel and other nonporous construction materials
  • Sound and traffic barriers, bridges, highway and street signs
  • Schools, malls, municipal buildings, stadiums, convention centers

Advantages

  • Complies with National Volatile Organic Compound Emission Standards for Architectural Coatings, Federal EPA Regulation 40 CFR Part 59
  • 0% V.O.C. content, biodegradable, odorless installation, does not require special protective clothing
  • Breathable for excellent moisture vapor transmission
  • Easy to apply and remove with standard equipment, develops barrier characteristics within minutes
  • Will not change the appearance of the substrate
  • Durable and non-yellowing
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091

ERISA Documents for Welfare Benefit Plan