facebook
twitter
linkedin

 
Home › Cures and Sealers › Penetrating › PowerSeal 40

PowerSeal 40

40% Solids, Water-Based, Penetrating Water Repellent Silane Sealer for Concrete

 

PowerSeal 40 is a high performance, 40% solids, surface applied, water-based, clear penetrating water repellent silane sealer for concrete. When properly applied the treatment does not produce a surface build up, darkening or other effect on the color or texture of the surface leaving a natural appearance. The material’s small molecular structure allows for maximum penetration into new concrete (14 day minimum) or existing concrete surfaces.


PowerSeal 40 prevents the penetration of water, salts and deicing chemicals, protecting the concrete from costly surface damage caused by freeze/thaw cycles, scaling, spalling, corrosion of structural rebar, wind driven rain, airborne contaminants and other severe weather conditions. .


PowerSeal 40 is specially formulated with a reduced evaporation rate allowing for more active ingredients to react within the substrate.

Uses

  • Horizontal or vertical, exterior or interior, cured concrete.
  • DOT, commercial, industrial and municipal applications.
  • All types of concrete flatwork, parking lots and structures, driveways, plazas, patios and walkways
  • Bridge and parking decks, median barriers, ramps and marine structures.
  • Building facades and balconies

Advantages

  • Extends the life of concrete
  • Water-based - increased safety and low odor
  • Long term protection against salt corrosion, deicing chemicals, mildew, water, wind driven rain, airborne contaminants, surface spalling from freeze/thaw cycles and other extreme weather conditions
  • Reduces corrosion of rebar and surface erosion in reinforced concrete
  • Does not alter natural surface texture or appearance
© 2021 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2021 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091