facebook
twitter
linkedin
 
Home › Product Support › Safety

Product Support

Learn how to use our products and find answers to questions or concerns.

Safety Precautions When Working with Cementitous Products

Safety begins with choosing the right product for the application environment!


Cement is corrosive - may cause severe skin burns & eye damage

  • Wear gloves and long sleeve shirts
  • Wear eye protection
  • Face shield protection may be recommended

Respirable silica is suspected of causing lung cancer

  • Wear dust masks / respirators
  • Avoid breathing dust
  • Use proper ventilation

Use protective equipment & clothing

  • Safety Glasses
  • Gloves
  • Face Shields
  • Dust Mask / Respirator
  • Protective Clothing

Keep vigilant

  • Don’t become complacent. Retain a healthy respect for the dangers of working with chemicals.
  • Doing it wrong a thousand times before just means you’re lucky.
  • Luck is all about the past. Safety is about your future.
  • Safety begins before you’re on the jobsite.

Before you select a product - Read and understand the manufacturer’s Technical Data Sheet. If anything is unclear call ChemMasters’ Technical Service at 1-800-486-7866.

  • Make sure the product is recommended for the application, purpose and location in which you intend to use it.
  • Make sure the product is recommended for the anticipated environmental conditions and application techniques.
  • Make sure you understand the surface preparation requirements.
  • Pay particular attention to required timing and limitations.
  • Have a plan in place for your application process.

Before you arrive at the jobsite - Read and understand the manufacturer’s Safety Data Sheet. If anything is unclear, call ChemMasters’ Technical Service at 1-800-486-7866.

  • Understand both the health and safety hazards posed by the product and environment in which you intend to apply it.
  • Have a plan in place to address hazards should they occur.
  • Understand and employ the recommended PPE.
  • Make sure everyone on the jobsite is similarly informed.

Before you begin working at the jobsite, make sure you’re prepared.

  • Is everyone on site aware of the hazards and limitations?
  • Is everyone aware of your plan to address hazards should they occur?
  • Is adequate safety equipment on hand?
  • Is everyone wearing the recommended PPE?
  • Review the product label prior to opening the container.

Cement is corrosive - may cause severe skin burns & eye damage

  • Wear gloves and long sleeve shirts
  • Wear eye protection
  • Face shield protection may be recommended

Respirable silica is suspected of causing lung cancer

  • Wear dust masks / respirators
  • Avoid breathing dust
  • Use proper ventilation

Use protective equipment & clothing

  • Safety Glasses
  • Gloves
  • Face Shields
  • Dust Mask / Respirator
  • Protective Clothing
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091

ERISA Documents for Welfare Benefit Plan