Spray Film™

SprayFilm™ is effective in combating rapid drying of the surface during adverse conditions including high temperatures, low humidity high winds, direct sunlight or interior work in heated conditions.

Uses

• Fresh concrete surfaces where the evaporation rate exceeds the rate of bleeding of the concrete
• Exterior placements during times of low humidity, high winds, direct sun or temperatures exceeding 75°F (24°C)
• Interior placements in heated areas or with low humidity or areas subjected to drafts
• Large dry shake placements where surface moisture must be retained for proper installation

Advantages

• Reduces surface moisture loss by approximately 80% in windy conditions and 40% in direct sunlight
• Will not interfere with the adhesion of subsequent curing & sealing compounds
• Reduces crusting, stickiness and sponginess which may cause uneven or poor surface texture
• Reduces plastic shrinkage cracking and wind crusting on flat-work
• Allows lower water content in concrete mix since SPRAY FILM eliminates the need to add extra mixing water to the mix to compensate for rapid evaporation during finishing
• Keeps the surface plastic and finishable for a longer time